Carpro DQUARTZ GO Nano Diamond Coating 50ml Kit


R2,595,00

Out of stock

Carpro DQUARTZ GO Nano Diamond Coating 50ml Kit

Nano Diamond Quartz Fusion Coating. A single coat will blow your mind with years of protection, beads, gloss, and ease of maintenance!

Prepare yourself for the most powerful automotive protection to hit the market to date! DQUARTZ GO is prepared to redefine the limits of vehicular surface protection. Bugs, dirt, UV… none of it stands a chance with DQUARTZ GO protecting your car. With incredible gloss, BEADS that last for many years, and best in class resistance to the wear and tear of daily life, DQUARTZ GO boasts the ultimate in resistance to all manner of abuse and filth. From UV, to chemical, mineral, acidic, alkaline, solvents, and even mechanical wear, DQUARTZ has gone where no coating has gone before! In fact, even a single coat offers phenomenal benefits!

CARPRO has taken the incredible DQUARTZ Professional created a formulation for use by automotive enthusiasts and weekend superstars. CARPRO even introduced a smoothing formula based on fluoropolymers which provides a satisfyingly slick touch once cured!  

Whether it’s for automobiles, home appliances, or most any metal surface, DQUARTZ GO delivers superior protection and reliably increases surface hardness. When it comes to home use, nothing protects your home and wallet better than DQUARTZ GO and a microfiber towel. No longer are strong chemicals needed to lift food or stains from surfaces. When coated with DQUARTZ GO, all you need is a damp microfiber to easily remove residue, spilled food, liquids, and more. DQUARTZ GO even prevents bacterial growth on most surfaces!

Features & Specifications:

  • Durable.
  • Hard.
  • Slick to the touch.
  • Versatile.
  • 50ml Kit.

Primary Applications:

  • Automotive paint.
  • Most metals.
  • Home appliances.

Directions:

  1. Wash, decontaminate, mechanically polish (When polishing, avoid using polishes with fillers, such as CARPRO Essence), and panel wipe the paint. 
  2. Wrap 4″ microfiber suede around the grey side of applicator block or simply use our MF applicator. 
  3. Shake bottle.
  4. Point away from your face and slowly open bottle. Then drag one or two lines of product along length of applicator. 
  5. Wipe evenly across 2 Sq Ft +/- section in criss cross or overlapping motion using light and even pressure.
  6. Wait 5 ~ 15 minutes (depending on temperatures and flash time) before wiping.
  7. Once it feels slightly tacky, gently wipe off with a CARPRO 2Face Microfiber Towel. 
  8. Be sure to remove all excess residue and only then move to the next section. 
  9. NOTE: Always test ONE section first and make sure you understand application before proceeding.
  10. Flip or switch out to new 4″ suede every 1 ~ 2 panels or if residue or dirt becomes visible.
  11. 1 layer of DQ GO is enough, but if you wish to apply an extra layer, you may do so after 1 hour from the time you began the first layer.
  12. Repeat application process starting in the same panel and moving the same direction around the vehicle.
  13. Keep out of the elements for 48 hours for best performance and durability.

Topper:

CARPRO does not recommend a topper unless you have a good reason to do so however, if you do choose to top DQUARTZ GO then wait a minimum of:

  1. 1 Hour if using CQUARTZ SiC
  2. 4 Hours if using Reload
  3. 4 Hours if using Release
  4. 4 Hours if using GLISS

Coating Maintenance:

  1. Most importantly, use CARPRO Reset to wash regularly. Other soaps can leave residue that temporarily messes up the beading and allows dust and dirt to stick more readily.
  2. Wash Mitt:
    • Microfiber mitt 
(Recommended for daily drivers and most cars – This mitt is easiest to maintain and is extremely durable as well as washing out most easily)
  3. Drying Towel
  4. Quick Detailing: CARPRO Release and towels.
  5. Occasionally (every 3 to 12 months depending on miles) decontaminate surface with CARPRO Iron X.  Use during wash cycle (after Reset) and as directed.
  6. Use CARPRO Reload every 3-12 months or as you prefer.

Additional Tips:

  • Finding the right time to “level” (wipe off) excess coating after it flashes:
  • Start with a single 2ft x 2ft test section to determine flash time before applying coating to entire vehicle.  Flash time will vary depending on temperature, humidity, air movement, paint type, how thick it is applied, and more.
  • If coating is applied thick then the coating will take longer to flash. If applied thin it will flash faster. Hot temps will cause it to flash faster, cold temps will cause it to flash slower. Air movement will cause it to flash faster.
  • When it flashes you will see it begin to change in wetness, appearance, or else bead up.
  • All streaks should wipe off and the paint should be nice and clear.
  • Lighting – Lighting is key to make sure you wipe off completely without leaving high spots.  You don’t want “direct light” like you would use on paint correction, but rather ambient light. Look at the paint from different angles to make sure none of the coating is missed. Spot light will “wash out” the high spots visually. Think of it like this: when you wipe off a sealant you have hours to go and check it again outside or in other lighting.  In this case you need to pay attention as you go rather than wait an hour. Thorough removal of residue and streaks is necessary to avoid the need to polish off high spots later.
  • Wait between 2 ~ 15 minutes depending on temperature, humidity, and air movement, and find the right window to wipe when you’re doing your test panel. Generally in medium temperatures 7 ~ 10 minutes is the right window.
  • High spots – A high spot is excess coating that was not leveled (wiped off). Most of the time it will look like a darker or rainbow colored mark. If you discover them within minutes then a bit more product will easily lift them. If found days later then you would use a dot of finishing polish such as CARPRO Reflect and rub the high spot off, wipe it down with CARPRO Eraser or your IPA of choice, and then re-coat that area and onto the area around it by about 6″.  Then start wiping off the perimeter immediately and slowly work inwards to feather it until you reach the area you are trying to re-coat at the appropriate time. This is the method used to avoid polishing the entire panel and re-coating.

Precautions:

  • Do not apply in direct sun or on hot surface.
  • Keep away from children
  • Do not re-use 4″ suede applicators.
  • Do not re-use the towels you used to buff off with on paint.
  • Wear hand protection.
  • Wear respiratory protection such as a painters mask.